Frame Kit Virtue LTD

Previous Next

+ Click Picture to Zoom

Download

GENERAL INFO

TECHNOLOGY

TECHNICAL SPECS BIKE GEOMETRY

SHARE THIS BIKE

Frame Kit Virtue LTD

В 2012 Virtue Ltd получил совершенно новый дизайн: раму, созданную с применением новейших технологий в сфере обработки карбонового волокна и удостоенную многих наград подвеску Equilink, ход которой может быть изменен от 120 до 130мм, для преодоления любых типов препятствий. Новая рама, созданная с применением карбонового волокна UHC Ultimate+Nano, имеет коническую рулевую, для большей жесткости и управляемости.

Additional Info

Frame:

Felt Virtue UHC Ultimate plus Nano carbon Equilink series, adjustable 120/130mm travel suspension frame: set at 130mm UHC Ultimate plus Nano Dynamic Monocoque carbon fiber front and rear triangle, Equilink suspension technology, Controltaper 1.125/1.5 integrated head tube, high clearance seat and chainstay yokes, replaceable rubber down tube protector. bolt on kevlar chain watcher. IS disc mount, replacable derailleur hanger.
Fork:

n/a
Accessories:

n/a
Finish:

Gloss carbon/moto green
Sizes:

S/M/L/XL
Weight:

Equilink is Felt's patented award-winning suspension design completely that isolates active working suspension from drivetrain or braking influence. The result is ride efficiency like no other suspension platform whether on a 24-hour epic, high-speed short-track loop or aggressive all-mountain terrain.

InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and heat results in perfectly formed tubes, inside and out.

By using a ControlTaper head tube with 1-1/8” upper bearings and 1-1/2” lower bearings, Felt is able to significantly improve front-end stiffness and steering precision without adding weight to the frameset.

Dynamic Monocoque Construction is a cutting-edge carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them with a special co-molding process. The primary advantage of DMC is that it allows each section of the frame to be optimized to meet the specific engineering demands of that particular section of the frame and to fully maximize the benefits of InsideOut technology.

UHC Ulimate+ Nano is the mark of Felt’s lightest, stiffest, best performing frames. UHC stands for Ultra Hybrid Carbon, and as the name indicates these frames feature a hybrid blend of high modulus raw carbon fiber. The stiffest fibers are used in certain areas of the frame, more durable fibers in others. Nano refers to a proprietary resin matrix that increases frame strength at the molecular level.

	S	M	L	XL
Head Tube Angle	69	69	69	69
Seat Tube Angle	73.5	73.5	73.5	73.5
Top Tube Horizontal	551	576	600	625
Top Tube Center to Center	527	549	570	593
Head Tube Length	110	120	135	150
Seat Tube Center to Top	411	445	495	545
Bottom Bracket Rise	10	10	10	10
Chainstay Length	425	425	425	425
Front Center	652	678	702	728
Wheelbase	1075	1101	1125	1151
Rake	39	39	39	39
Standover Height	693	703	747	788
Seat Post Diameter	30.9	30.9	30.9	30.9