Z2 - Felt Bicycles

Frame:

Felt Endurance Road UHC Advanced MMC Carbon Fiber frame w/ 3KP weave, InsideOut internal molding process, aluminum BB30 shell, internal electric or mechanical cable routing, Carbon Fiber dropouts & replaceable rear derailleur hanger
Fork:

Felt Endurance Road UHC Advanced Carbon Fiber monocoque fork; 100% Carbon Fiber ControlTaper 1.125" - 1.5" steerer tube, crown, blades, & dropouts
Drivetrain:

Shimano Ultegra Di2 STI w/ secondary climbing shifter, braze-on front derailleur, rear derailleur, Hollowtech-II 50/34T crankset, 10-speed chain, 12-28T cassette
Components:

Shimano Ultegra Super SLR dual pivot w/ cartridge brake pads, 3T Ergosum Team HM Carbon Fiber handlebar, 3T ARX Team stem, 3T DORICO Team UD Carbon Fiber seatpost, Prologo Nago Evo T1.4 saddle
Wheelset:

Shimano RS20
Accessories:

Shimano Di2 battery & battery charger
Finish:

Matte Carbon
Sizes:

700c x 51cm, 54cm, 56cm, 58cm, 61cm
Weight:

16.79lbs | 7.63kg

This indicates Felt’s exclusive premium quality component line Devox. Every component with the Devox name was designed by the same team of engineers responsible for cutting-edge Felt bikes and technology. When you see the Felt Devox name, you know that particular part or component is held to the very highest technological and performance standard.

This indicates the use of flow-through internal cable routing. It reduces wind drag and prevents contaminants from entering and interfering with the function of brake or shifter cables.

InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and heat results in perfectly formed tubes, inside and out.

Modular Monocoque Construction is an advanced carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them together. The main advantage of MMC is that it allows each section to be optimized to meet the specific engineering demands of that particular section of the frame.

Ultra Hybrid Carbon Advanced refers to the lightweight, stiff and durable blend of carbon fiber material used in the performance frames bearing the UHC Advanced label. Because the high modulus materials have a higher fiber to resin ratio, these frames are typically about 20% lighter than UHC Performance frames while remaining equally strong and stiff. UHC Advanced offers the best combination of value and performance.

Felt’s DuPont paint is the highest quality paint offered on Felt products. Reserved for our top-of-the-line bicycles, DuPont paint offers unparalleled clarity and durability in a multitude of colors.

	51	54	56	58	61
Head Tube Angle	72	72.5	72.5	72.5	72.5
Seat Tube Angle	74.5	74	73.5	73	73
Top Tube Horizontal	525	545	560	575	595
Top Tube Center to Center	507	524	538	551	571
Head Tube Length	140	160	180	200	220
Seat Tube Center to Top	470	500	520	540	570
Seat Tube Center to Center	415	425	445	465	495
Bottom Bracket Drop	70	70	70	70	70
Chainstay Length	417	417	417	417	417
Front Center	583	595	605	615	635
Wheelbase	990	1002	1012	1022	1042
Rake	50	50	50	50	50
Standover Height	698	727	747	767	795
Reach	373	384	388	391	405
Stack	541	561	580	600	620

Finish:

Matte Carbon
Sizes:

700c x 51cm, 54cm, 56cm, 58cm, 61cm
Weight:

16.79lbs | 7.63kg
Frame:

Felt Endurance Road UHC Advanced MMC Carbon Fiber frame w/ 3KP weave, InsideOut internal molding process, aluminum BB30 shell, internal electric or mechanical cable routing, Carbon Fiber dropouts & replaceable rear derailleur hanger
Shock:

n/a
Fork:

Felt Endurance Road UHC Advanced Carbon Fiber monocoque fork; 100% Carbon Fiber ControlTaper 1.125" - 1.5" steerer tube, crown, blades, & dropouts
Headset:

FSA NO.42 1.125" - 1.5" integrated, w/ aluminum 15mm cone spacer, 2 x 10mm PC headset spacer, 1 x 5mm PC headset spacer, Felt compression device, Carbon Fiber top cap & 7075 anodized aluminum bolt
Stem:

3T ARX Team 7075 T6 aluminum w/titanium bolts, +/-6° rise, Ø31.8mm bar clamp, 51cm=80mm, 54cm=90mm, 56cm=100mm, 58cm=110mm, 61cm=110mm
Handlebar:

3T Ergonova Team HM Carbon Fiber, ergonomic, compatible with most clip-ons, Ø31.8mm, Drop: 123 mm, Reach: 77 mm, 51cm=40cm, 54cm=42cm, 56cm=44cm, 58cm=44cm, 61cm=46cm
Grips:

Felt Gel Tape w/ Felt Logos
Bar Ends:

Felt Bubble-Tech "F Wing" Icon End Plugs
Shifters:

Shimano Ultegra Di2 STI w/ secondary climbing shifter
Front Derailleur:

Shimano Ultegra Di2 braze-on
Rear Derailleur:

Shimano Ultegra Di2
Crankset:

Shimano Ultegra, 50/34T; 51cm=170mm, 54cm-56cm=172.5mm, 58cm-61cm=175mm
Chainwheel

Shimano 50/34T
Chainguide:

n/a
Bottom Bracket:

FSA BB30 w/ 24mm spindle reducers
Pedals:

n/a
Chain:

Shimano 10-speed
Freewheel:

Shimano, 12-28T
Brake Levers:

Shimano Ultegra Di2
Brakes:

Shimano Ultegra Super SLR dual pivot w/ cartridge brake pads
Cables:

Shimano SLR brake & Di2 derailleur cables
Saddle:

Prologo Scratch Pro Ti 1.4, Carbon Fiber injected base w/EV2 Active Density Foam & Ti 1.4 rails
Seat Post:

3T DORICO Team UD Carbon Fiber w/titanium bolts, Ø27.2mm
Seat Post Clamp:

Felt 6061 forged aluminum double bolt, steel Bolt and Nut-bar
Rims:

Shimano RS20
Front Hub:

Shimano RS20
Rear Hub:

Shimano RS20
Spokes:

Shimano RS20 stainless steel
Tires:

Vittoria Diamante Pro-Light 700c x 25c, 220 tpi
Fenders:

n/a
Kickstand:

n/a
Accessories:

Shimano Di2 battery & battery charger

Needs Content

Felt Bicycles

Z2

Price: $5,999